Shopping Cart

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included). Fits Belkin cable, please compare the connector on the picture so you know you will get the correct holder for your cable.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the holder with the backside upwards. Press on the button on the connector, in the same time place the connector into the lower part of the holder. The mark pointing downwards, so you can not see it when placing the connector into the holder.

2. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the enclosed screws. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder in place, with cable in place.