Shopping Cart

This holder is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in any place where you want to use your iPad without having it easy removable.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Carefully, slide the device sideways into the holder so you hear/feel it snaps into place. To lock the holder: slide the spring stud locking device sideways onto the left part of the holder.

3. To remove the device from the holder: Slide the spring stud locking device to the left, then the device from the holder.

4. The holder is in place.