Shopping Cart

Now in Your Cart (0) Items

Device Holders

Car Proclip Mounts

Home > Brodit > Apple iPhone 4 Brodit Active Holder Tilt Swivel (#521165)
Bookmark and Share

Apple iPhone 4 Brodit Active Holder Tilt Swivel (#521165)

Product ID: Brodit 521165

Product Type: Brodit Active Holder Tilt Swivel

Product Model: Apple iPhone 4 for Alla

Inc VAT : £ 57.00
Ex VAT : £ 47.50
Stock: In Stock [Qty 2]

Today’s Price £ 57.00 Inc VAT
  • Add to Wishlist
  • Also Compatible with Products

Product Details

Adjustable holder with cig-plug. Fits devices with skin (NOT for Apple original Bumper).

Technical Detail

Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder’s cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

The holder fits for devices with skin (not for devices with Apple iPhone original Bumper)

The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Instalation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder for your device: Loosen the screws on the back side of the holder, so the sides of the holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in place.

2. Tighten the screws on the back side of the holder. To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Product Instalation Images

Shop By Make
  • Acer
  • Acura
  • Adyen
  • Airbus
  • Airo
  • Albecom
  • Alcatel
  • Alfa Romeo
  • Alpine
  • Amazon
  • Amitech
  • Apple
  • Asus
  • AT&T