Shopping Cart

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your Nokia in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Remove the back piece from the holder.

2. Place the holder with the backside upwards. Press on both sides of the connector, so the notches go into the connector. Place the connector into the lower part of the holder. The marks pointing downwards, so you can not see them when placing the connector into the holder. Place the back piece over the connector and screw it into place. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.