Shopping Cart

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Please read all of the instructions and look at the pictures before attaching the holder.

1. Attachment of cable: Remove the two screws in the lower back part of the holder and remove the small lid. Hold the lid with the opening facing toward you. Press the cable into the groove in the upper part of the lid. Adjust the length of the cable so you can fold the connector into place in the opening. Press the connector into place in the opening, mark facing toward you. Put the lid back into place in the lower back part of the holder.

2. Screw the screws back into place so the lid is properly attached to the holder.

3. Attachment of holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

4. The holder is in place.